Continuous Cleat Coping
DMI’s DynaClad® Edge Continuous Cleat Coping System provides a secure, finished edge for commercial roof parapet walls. Designed with 20-gauge continuous front and back cleats, the system conceals fasteners while creating clean architectural lines along the roof perimeter. Available in a variety of metals and finishes, Continuous Cleat Coping is fabricated in standard 10-foot lengths with prefabricated corners and accessories for a consistent installation. The system is ANSI/SPRI ES-1 tested, with wind warranty options available for qualifying projects.
Finish
DynaClad® 70% Full Strength PVDF Paint Finish
Colors
Choice of over 32 Colors
Product Offerings
Offered in a large variety of materials and colors.
- Galvalume® (22 ga. & 24 ga.) – See our color chart for standard color offering
- Aluminum (.050 & .040) – See our color chart for standard color offering
- Copper (20 oz. & 16 oz.)*
*Contact DMI for verification of test report on your project.
*Warranty unavailable for these materials
Advantages
- All fasteners are concealed utilizing pre-punched holes on 20 ga. Continuous front and back cleats
- Tested per ANSI/SPRI/ES-1/FF4435
- Fabricated in standard 10′ lengths
- Pre-fabricated miters and accessories to match coping system
- 20 year, 120 mph wind warranty
Accessories
- Corners (inside, outside, and special)
- End Cap (left and right)
- End Term (left and right)
- Other Custom Items
Project Support
DMI provides tools and resources to streamline your project.
Submittal Builder
Access order forms, cut sheets, technical data, installation guides, and warranties in one place.
Find a Representative
Use our interactive map to connect with the DMI representative serving your area.
AIA Continuing Education
AIA Continuing Education DMI is committed to providing you with high-quality expert-level education in accordance with the AIA/CES standards. The courses we offer are designed to meet the needs of architects and typically run one hour in length. All Attendees will earn 1 Learning Unit. Some of the courses offered will meet the Health, Safety, and Welfare (HSW) requirements as well as the Green Building Certification Institute (GBCI) credits.
Our Warranties are Second to None
DMI total system warranties protect all aspects of your metal envelope system, whether that be the watertightness of the roof or siding, the Galvalume ® steel, or the durable PVDF KYNAR® finish. When looking at warranties for your system, it is important to note that not all warranties are created equal. DMI warranties ensure the watertightness of all flashing conditions, trims, curbs, valleys, and penetrations. Building owners are protected with a total system warranty - “from the deck up” when using DMI insulation, fasteners, and underlayment. Our warranties are backed-up by a full-service Engineering Department, generating project specific shop drawings. Quality control is monitored by a minimum of two on-site inspections by our Field Technical Inspectors. DMI Total System Warranties give building owners and design professionals confidence that they are receiving the highest quality and most complete warranty available in the industry.