DynaClad Polyiso


H-Shield Polyiso is a rigid roof insulation panel composed of a closed cell polyisocyanurate foam core manufactured on-line to fiber reinforced facers on each side.


Features and Benefits

  • Manufactured with NexGen Chemistry: Contains no CFCs, HCFCs, is Zero ODP, EPA Compliant, and has virtually no GWP
  • Approved for direct application to steel decks
  • Approved under all major roof covering systems – BUR, Modified, and Single-Ply

DOWNLOAD POLYISO CUT SHEET

Manage and download this product's documents with Submittal Builder
Free to registered users.

Login/Register

CHARACTERISTICS

  • Available in two grades of compressive strengths per ASTM C1289 Type II, Class 1 Grade 2 (20 psi) or Grade 3 (25 psi)
  • Available in 4’x4′ (1220mm x 1220mm) and 4’x8′ (1220mm x 2440mm) panels in thicknesses of 1″ (25mm) to 4.5″ (114mm)

APPLICATIONS

  • Constructions requiring FM Class 1 and UL Class A ratings
  • Single-Ply Roof Systems (Ballasted, Mechanically Attached, Fully Adhered)
  • Standing Seam Metal Roof Systems
  • Modified Bitumen Systems
  • Built-Up Roofing: Asphalt and Coal Tar

TESTING

Codes and Compliances

  • ASTM C 1289 Type II, Class 1 Grade 2 (20 psi) or Grade 3 (25 psi)
  • International Building Code (IBC) Chapter 26
  • State of Florida Product Approval Number FL 5968
  • Miami Dade County, FL NOA NO: 09-0915.15 — Exp. 1.14.2015

Underwriters Laboratories Inc Classifications

  • UL 1256
  • Insulated Metal Deck Construction Assemblies – No. 120, 123, 292
  • UL 790
  • UL 263 Hourly Rated P Series Roof Assemblies

UL Classified for use in Canada

  • Refer to UL Directory of Products Certified for Canada for more details
  • CCMC 13460-L
  • UL Certified for Canada, CAN/ULC-S126, CAN/ULC-S101, CAN/ULC- S107

Factory Mutual Approvals

  • FM 4450, FM 4470
  • Approved for Class 1 insulated steel deck constructions for 1-60 to 1-270. Refer to FM Approval’s RoofNav for details on specific systems

LEED Potential Credits for Polyiso Use (PRE LEED V4)

For current LEED V4 contribution information go to www.PIMA.org or www.hpanels.com

  • Energy and Atmosphere
    • Optimize Energy Performance
    • Measurement & Verification
  • Materials & Resources
    • Material Reuse
    • Construction Waste Management
    • Recycled Content
    • Local and Regional Materials
  • Innovation and Design

WARNINGS

Insulation must be protected from open flame and kept dry at all times. Install only as much insulation as can be covered the same day by completed roof covering material. Hunter Panels will not be responsible for specific building and roof design by others, for deficiencies in construction or workmanship, for dangerous conditions on the job site or for improper storage and handling. Technical specifications shown in this literature are intended to be used as general guidelines only and are subject to change without notice. For more information refer to the Storage and Handling Technical Sheet, or refer to PIMA Technical Bulletin No. 109: Storage & Handling Recommendations for Polyiso Roof Insulation at www.polyiso.org.

AIA Continuing Education

DMI is committed to providing you with high-quality expert-level education in accordance with the AIA/CES standards. The courses we offer are designed to meet the needs of architects and typically run one hour in length. All Attendees will earn 1 Learning Unit. Some of the courses offered will meet the Health, Safety, and Welfare (HSW) requirements as well as the Green Building Certification Institute (GBCI) credits.

information on available courses

Our Warranties are Second to None

DMI total system warranties protect all aspects of your metal envelope system, whether that be the watertightness of the roof or siding, the Galvalume ® steel, or the durable PVDF KYNAR® finish. When looking at warranties for your system, it is important to note that not all warranties are created equal. DMI warranties ensure the watertightness of all flashing conditions, trims, curbs, valleys, and penetrations. Building owners are protected with a total system warranty - “from the deck up” when using DMI insulation, fasteners, and underlayment. Our warranties are backed-up by a full-service Engineering Department, generating project specific shop drawings. Quality control is monitored by a minimum of two on-site inspections by our Field Technical Inspectors. DMI Total System Warranties give building owners and design professionals confidence that they are receiving the highest quality and most complete warranty available in the industry.

Browse Our Warranties