Groveport Recreation Center | Groveport, OH

Double-Lock DL20


Double-Lock DL20 is a structural panel which is mechanically seamed during installation. The panel is an integral interlocking system by design which installs in one direction from a given starting point. A double male starter panel is available (for a minimal set-up fee) and may be installed in the middle of a roof area to achieve a symmetrical layout. DOUBLE-LOCK utilizes the traditional SMACNA standing seam “double-lock” plate.




Three different clips are available
Low Floating and Fixed

Finish
DynaClad® 70% Full Strength PVDF Paint Finish

Colors
Choice of over 32 Colors


single-locked-dl20


DOWNLOAD DL20 CUT SHEET

DL20 Cut Sheet

 

 

 

 

 

 

 


 

Manage and download this product's documents with Submittal Builder
Free to registered users.

Login/Register

Roof Assemblies

DOUBLE-LOCK DL20 can be applied over various roof substrates including: open framing, rigid
insulation (utilizing a bearing plate under each panel clip spaced 48” o.c., max.) over 22 ga. steel deck, and various solid subtrates including plywood sheathing and nail base insulation.

Uses & Applications

Product uses include low to high slope roofing, vertical fascia, equipment screens, mansards, and wall panels. This system may also be installed on tapered and curved roof areas.


*Note: Metallic paint finishes are “directional” and are not recommended for “double male” panels.

Product Offerings

24 ga.., 22ga, . Steel, .032, and .040 Aluminum

  • DL2012 with 12″ o.c. seams
  • DL2016 with 16″ o.c. seams
  • DL2018 with 18.3125″ o.c. seams

16, 20 oz. Copper

  • DL2012 with 12″ o.c. seams
  • DL2018 with 17.65″ o.c. seams

24 ga (.7mm) and 22 ga (.8mm) RHEINZINK

  • DL2014 with 14″ o.c. seams

Note:  Other widths available.  Contact DMI for questions.

Performance Tested

  • UL-580 Wind Uplift
  • ASTM E1592 Uniform Static Air Pressure
  • ASTM E1646 Water Penetration
  • ASTM E1680 Air Leakage

Advantages

  • Factory Applied Non-Curing Sealant: For superior watertightness
  • SMACNA Seam Design: A traditional and historical aesthetic appearance
  • Mechanically Seamed: May be installed on low slope applications down to 1/2:12 slope
  • Expansion Clips: Allows for thermal expansion and contraction
  • Continuous Rollformed Lengths: Eliminates need for panel lap joints
  • Total System Warranties Available: For total confidence

*Note: Metallic paint finishes are “directional” and are not recommended for “double male” panels.

AIA Continuing Education

DMI is committed to providing you with high-quality expert-level education in accordance with the AIA/CES standards. The courses we offer are designed to meet the needs of architects and typically run one hour in length. All Attendees will earn 1 Learning Unit. Some of the courses offered will meet the Health, Safety, and Welfare (HSW) requirements as well as the Green Building Certification Institute (GBCI) credits.

information on available courses

Our Warranties are Second to None

DMI total system warranties protect "all aspects" of your metal envelope system. Whether that be the watertightness of the roof or siding, the Galvalume steel or the protective KYNAR finish. When looking at the warranties for your system it is important to note that not all warranties are created equal. DMI warranties ensure the watertightness of all flashing conditions, trims, curbs, valleys, and penetrations – a total system guarantee. Our warranties are backed-up by a full-service Engineering Department, project-specific shop drawings, and quality control is monitored by a minimum of two on-site inspections by our Field Technical Inspectors. DMI Total System Warranties give building owners and design professionals confidence that they are receiving the best quality and guarantee available in the industry!

Browse Our Warranties