Grandview Yard Apartments | Columbus, Ohio

7.2 Panel WP72


7.2 PANEL7.2 Panel WP72 has a symmetrical design allows for versatility in applications while providing a clean industrial look. It is an exposed fastener panel utilized for wall and roof applications. It has a 1-1/2″ rib height at 7.2″ o.c. and 36″ of panel coverage with a purlin bearing leg.

Panel Gage Span Span (Feet)
4 5 6 7 8 9
24 (50 ksi) 3 70 60 50 40 30 20
22 (50 ksi) 3 120 100 80 55 40 30
24 (50 ksi) 2 70 60 50 40 30 25
22 (50 ksi) 2 110 90 70 50 40 30
Table for live load, no wind increase included. Deflection limit = L/240.
Analysis per AISI 2001 manual. Additional spans available – Contact DMI

Both metal and foam closures available

DynaClad® 70% Full Strength PVDF Paint Finish

Choice of over 32 Colors


7.2 Panel Cut Sheet

Manage and download this product's documents with Submittal Builder
Free to registered users.



7.2 PANEL WP72 can be applied over various wall and roof assemblies including: open framing and solid substrates.

Uses & Applications

Product uses include vertical and horizontal wall panels, equipment screens, mansards and roofing with roof slopes as low as 2:12. Excellent panel for wall retro-fit applications.

Product Offerings

  • 24 ga., 22 ga., 20 ga., 18 ga. Steel, and .032, .040, .050 Aluminum
  • Embossing available
  • Perforations available (Aluminum and Stainless Steel)
  • Mitered Corners Are Available

Performance Tested

  • ASTM E1646 Water Penetration
  • ASTM E1680 Air Leakage

AIA Continuing Education

DMI is committed to providing you with high-quality expert-level education in accordance with the AIA/CES standards. The courses we offer are designed to meet the needs of architects and typically run one hour in length. All Attendees will earn 1 Learning Unit. Some of the courses offered will meet the Health, Safety, and Welfare (HSW) requirements as well as the Green Building Certification Institute (GBCI) credits.

information on available courses

Our Warranties are Second to None

DMI total system warranties protect "all aspects" of your metal envelope system. Whether that be the watertightness of the roof or siding, the Galvalume steel or the protective KYNAR finish. When looking at the warranties for your system it is important to note that not all warranties are created equal. DMI warranties ensure the watertightness of all flashing conditions, trims, curbs, valleys, and penetrations – a total system guarantee. Our warranties are backed-up by a full-service Engineering Department, project-specific shop drawings, and quality control is monitored by a minimum of two on-site inspections by our Field Technical Inspectors. DMI Total System Warranties give building owners and design professionals confidence that they are receiving the best quality and guarantee available in the industry!

Browse Our Warranties